How To Draw A Tree In Winter

Download Article

Download Article

Knowing how to draw a tree comes in handy when you're sketching a mural or forest scene. Fortunately, cartoon a tree is uncomplicated once you know where to start, whether you desire to make a simple tree, a leafless winter tree, or a tall evergreen. By starting with an outline and then adding the parts of the tree as y'all go, you can depict a realistic-looking tree in no fourth dimension!

1. 

   1

   Draw a long horizontal line and the body of the tree first. The horizontal line will exist the ground line, or the ground that your tree is growing out of. To depict the body, sketch 2 vertical lines coming up out of the ground line.^[1]

   • The height and width of the torso is up to you, only don't make it too tall or wide or it may not look realistic.

2. 

   2

   Add some sparse branches coming out of the top of the torso. Spread the branches out and have them going in unlike directions so it looks like branches on a real tree. Brand sure the branches are thinner than the torso of the tree.^[2]

   • Don't worry about making the branches perfect. Some of them will go covered upwardly later when y'all add the leaves to your drawing.

   Advertisement

3. 

   3

   Draw a big circle around the branches. This will exist the outline for the crown (leafy acme) of your tree. The top of the circle should extend past the tips of the branches, and the bottom of the circumvolve should line up with the pinnacle of the trunk.^[3]

   • This circle is just an outline, then it doesn't demand to be perfect!

4. 

   iv

   Use wavy lines to add leaves to the crown of the tree. Start by following along the circle you drew and making random, wavy lines. Then, add some wavy lines inside of the circle to requite the tree dimension.^[4]

   • Attempt to draw the lines in random places within of the circle so the leaves on the tree look more realistic.

5. 

   5

   Shade in the tree to finish your drawing. Offset past shading in the trunk then that ane side is darker than the other. Then, shade in the branches and the leaves, making the bottom of crown darker than the top. Y'all tin can also shade effectually the ground line to make it look like your tree is casting a shadow.^[5]

   • One time you terminate shading your cartoon, you're finished!

   Advertisement

1. 

   ane

   Depict a trunk with three large circles on tiptop of it. To brand the torso, draw ii vertical lines next to each other that taper in toward the top. When yous draw the iii circles, put 2 on the lesser 1 on the elevation.^[6]

   • Effort to brand the circles effectually the same size, but they don't need to be perfect. You'll just exist using them equally a guide when y'all add the branches to the tree after on.

2. 

   2

   Add together 2-iii large branches coming up off the torso. These will exist the big, supporting branches of the tree. To depict a branch, draw two parallel lines coming up off the acme of the body and have them taper in at the end and so they encounter at a point. Make sure the branches are inside of the circles yous drew earlier.^[7]

   • Have the branches go in different directions so your tree looks more than realistic.

3. 

   iii

   Describe small branches coming off of the large branches. To make these branches, you can just describe thin lines coming off of the large branches of the tree. Extend these branches so they hit the edges of the circles you drew on top the trunk. The branches at the bottom of the tree should extend further than the branches at the elevation.^[8]

   • Draw wavy, irregular lines to make the branches since perfectly straight lines won't expect realistic.

4. 

   iv

   Erase the 3 circles you drew before. Now that you've added the branches, yous don't need the circles equally a guide anymore.^[ix]

   • Be careful erasing so you don't accidentally erase the branches you drew!

5. 

   5

   Finish your cartoon by shading in the trunk and branches. Shade the tree so that one side of the body and branches is lighter than the other. That mode it volition look like the lord's day is shining on the tree.^[ten]

   • You can as well add the footing that the tree is growing out of past shading in the area underneath the tree.

   Advertising

1. 

   1

   Depict a large, alpine triangle. This triangle will be the outline for your pine tree. The exact dimensions don't matter, but make sure it's not as well brusk or it won't await like a real pine tree.^[11]

   • If you lot want your tree to be symmetrical, draw the triangle using a ruler.

2. 

   2

   Make a line through the middle of the triangle and add a minor stalk. The line should run from the bottom of the triangle to the indicate at the top. To make the stem, draw a small, four-sided shape at the bottom of the triangle that tapers in at the top.^[12]

   • You'll exist erasing the line afterward, so don't worry about making it perfectly direct!

3. 

   3

   Add together curved spikes on both sides of the line to brand the branches. Draw the spikes then they commencement at the line in the center of the triangle and extend but by the side of the triangle. Make sure the spikes are curved upwards since that'due south how the branches on pine trees look.^[thirteen]

   • Endeavour to draw an equal number of curved spikes on both sides of the triangle.

4. 

   4

   Draw wavy lines over the spikes to make the branches more than realistic. Follow along the outline of the spikes and add the wavy lines as you lot go. Make the waves pocket-sized so they look like individual pine needles on the branches of the tree.^[fourteen]

   • The wavy lines don't demand to be the aforementioned on each branch. Cartoon them randomly will make your tree look real!

5. 

   5

   Erase all of the unnecessary lines to finish your drawing. Once you've finished the branches, you lot can get back in and erase the original triangle y'all drew. You can besides erase the line down the eye of the tree.^[15]

   • Be conscientious when yous're erasing the lines so yous don't accidentally erase the branches on the tree.

   Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Things You'll Demand

• Newspaper
• Pencil
• Eraser
• Sharpener

Nigh This Article

Article Summary X

To draw a tree, beginning past drawing a long horizontal line to brand the basis and then 2 vertical lines coming up off of it for the body. Then, sketch some thin branches extending off of the body so they're all going in different directions. Adjacent, draw a big circle around the branches and go over it with wavy lines to make the leaves. Too, depict wavy lines inside of the circle to requite the tree dimension. Finally, shade in the tree so ane side of the trunk is darker than the other. To learn how to draw a pine tree or a winter tree, whorl down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 50,801 times.

Did this article help you?

Source: https://www.wikihow.com/Draw-a-Tree

Posted by: cainwhiseve.blogspot.com

Share this post